Sonalika Rigid Spring Loaded Cultivator (SL-CL-MH & SL-CL-R Series)
{{ galleryProps.activeIndex + 1 }}/1
Description
Key Specification and Technology: Sonalika Rigid Spring Loaded Cultivator (Variant-wise)
| Model | Frame | Tyne (mm) | Rear/Front Linkage (mm) | …
Key Specification and Technology: Sonalika Rigid Spring Loaded Cultivator (Variant-wise)
| Model | Frame | Tyne (mm) | Rear/Front Linkage (mm) | Weight (kg) | Tractor Power (HP) |
| SL-CL-MH9 | 100×50 Ch | 50×25 Forged | 50×16 (Rear), 65×16 (F) | 290 | 45+ |
| SL-CL-MH11 | 100×50 Ch | 50×25 Forged | 50×16 (Rear), 65×16 (F) | 370 | 50+ |
| SL-CL-MH13 | 100×50 Ch | 50×25 Forged | 50×16 (Rear), 65×16 (F) | 440 | 55+ |
| SL-CL-MH15 | 100×50 Ch | 50×25 Forged | 50×16 (Rear), 65×16 (F) | 520 | 75+ |
| SL-CL-R9 | Sq. 72×72×5 | 20 (Forged) | — | 190 | 40+ |
| SL-CL-R11 | Sq. 72×72×5 | 20 (Forged) | — | 220 | 50+ |
- Mounting Type: 3-point linkage
- Blade/Shovel: High carbon steel, reversible
- Frame: Heavy-duty powder-coated for rust resistance
- Depth: Up to 8–9 inches (20–23 cm, typical)
Technical Specifications
- Soil Type Compatibility: Medium, heavy, and hard soils
- Field Efficiency: High, especially in stony and tough land
- Fuel Consumption: Efficient operation minimises tractor load
- Durability: Superior forged tynes, solid channel/square tubing
- Maintenance: Low; simple greasing and checks
- Spare Parts Availability: Widely available through Sonalika network
- Warranty/Service Support: Standard Sonalika warranty, broad service reach
- Weather Suitability: Year-round
- Crop Compatibility: Wheat, paddy, maize, pulses, sugarcane, cotton, vegetables
Agricultural Benefits and Applications
- Breaks up tough, compacted soil and uproots weeds
- Mixes crop stubble, prepares seedbed for planting
- Superior penetration ensures soil aeration and water retention
Enhanced Farming Efficiency
- Fuel Saving: Sturdy design and sharp tynes save diesel
- Time Saving: Wide coverage per pass; less overlap
- Labor Reduction: Eliminates manual tillage, ready for sowing
Versatile Crop Applications
- Suitable for all major Indian crops: wheat, paddy, maize, sugarcane, cotton, pulses, vegetables
Performance Specifications
- Consistent depth up to 9 inches
- Highly effective in stone, trash, and rooty environments
- Broad, heavy construction for long life
Farmer Decision Support
- Farm Size Recommendations:
- Small farms (<5 acres): SL-CL-R9
- Medium farms (5-25 acres): SL-CL-MH9, SL-CL-R11
- Large farms (>25 acres): SL-CL-MH11, MH13, MH15
- Soil-specific Recommendations:
Best for hard, clay, and trash-laden soils - Budget-wise Categorization:
Economy (SL-CL-R9), Mid-range (MH9, R11, MH11), Premium (MH13, MH15) - ROI Calculation Guidance:
Recoups cost in 1–2 cropping seasons via less labor, less diesel use - Financing/Subsidy:
TractorXpert guide on subsidy/loan availability
Maintenance and Care
- Grease linkage and tyne pivots
- Inspect and reverse/replace shovels when worn
- Tighten all bolts regularly after rocky or hard field operations
Longevity Factors
- Powder-coated for rust prevention
- Forged tynes and high-carbon steel blades resist wear and breakage
- Frame resists flexing and structural damage
FAQs Section (Farmer-Friendly Answers)
Q: What tractor horsepower (HP) is required for Sonalika Rigid Spring Loaded Cultivator?
A: 40–75+ HP as per variant.
Q: What types of tynes/blades are available in Sonalika Rigid Spring Loaded Cultivator, and what do they do?
A: Forged spring or rigid tynes cut, loosen, and mix hard soil; high carbon steel, reversible shovels provide long life and effective tillage.
Q: What is the working width of the Sonalika Rigid Spring Loaded Cultivator?
A: Varies by variant and tyne count: 1.75 to 3+ meters (6–10 feet, approx).
Q: How deep can it cultivate in a single pass?
A: Typically 8–9 inches (20–23 cm).
Q: Why is tyne/blade hardness and quality important in Sonalika Rigid Spring Loaded Cultivator?
A: Hard, forged tynes and blades mean less breakage, more field efficiency, and longer working life.
Q: Is it compatible with all tractor brands and models in India?
A: Yes, suitable for all standard HP tractors with 3-point linkage.
Q: What about maintenance, warranty, and service?
A: Very low maintenance, backed by Sonalika’s nationwide warranty and excellent service.
How TractorXpert Helps
TractorXpert ensures you compare cultivator price in India, specs, and reviews transparently—helping you choose the right Sonalika rigid spring loaded cultivator for your farm, saving costs, and boosting productivity with expert advice.
Product General Information
Brand Name:
Sonalika
Model Name:
Rigid Spring Loaded Cultivator (SL-CL-MH & SL-CL-R Series)
Implement Type:
Cultivator
Category:
Tillage
Compatible Tractor Power:
40–75+ HP
Engine
Transmission
Implement Type:
Cultivator
Category:
Tillage
Power Take off
Dimension & Weight
Hydraulics
Wheels
Cutting Mechanism
Reel
Threshing and Cleaning
Capacity
Other Information
₹ 340000
₹ 1L
₹ 25L
6.5 %
6%
26%
12
12
60
Related listings
Punni (Vishavkarma Engineering Works)
Punni (Vishavkarma Engineering Works) Punni Laser Land Leveler Speed DX
Contact for a price
