Farmking Extra Heavy Duty Cultivator
{{ galleryProps.activeIndex + 1 }}/1
Description
About Product
Brand: Farmking
Model Name: Extra Heavy Duty Cultivator
Implement Type: Cultivator
Category: Tillage
Compatible…
About Product
Brand: Farmking
Model Name: Extra Heavy Duty Cultivator
Implement Type: Cultivator
Category: Tillage
Compatible Tractor Power (HP Range): 35–75 HP
Key Specification and Technology: Farmking Extra Heavy Duty Cultivator
| Specification | FKLSC9 – EHD | FKLSC11 – EHD | FKLSC13 – EHD | FKLSC15 – EHD |
| Overall Dimensions (L×W×H) mm | 875 × 2280 × 1190 | 875 × 2550 × 1190 | 875 × 3100 × 1190 | 875 × 3580 × 1190 |
| Working Width (mm/inches) | 1830 / 72″ | 2290 / 90″ | 2745 / 108″ | 3200 / 126″ |
| Frame Construction (mm/inches) | 75 × 40 mm / 3″ × 1.5″ or 100 × 50 mm / 4″ × 2″ (Optional) | 75 × 40 mm / 3″ × 1.5″ or 100 × 50 mm / 4″ × 2″ (Optional) | 75 × 40 mm / 3″ × 1.5″ or 100 × 50 mm / 4″ × 2″ (Optional) | 75 × 40 mm / 3″ × 1.5″ or 100 × 50 mm / 4″ × 2″ (Optional) |
| Spring Dimensions (mm) | 10 mm wire diameter, 50 mm outer diameter | 10 mm wire diameter, 50 mm outer diameter | 10 mm wire diameter, 50 mm outer diameter | 10 mm wire diameter, 50 mm outer diameter |
| Three Point Hitch | CAT – II | CAT – II | CAT – II | CAT – II |
| Tyne Dimensions (mm/inches) | W-50/2″ × T-25/1″ or W-50/2″ × T-30/1.25″ (Optional) | W-50/2″ × T-25/1″ or W-50/2″ × T-30/1.25″ (Optional) | W-50/2″ × T-25/1″ or W-50/2″ × T-30/1.25″ (Optional) | W-50/2″ × T-25/1″ or W-50/2″ × T-30/1.25″ (Optional) |
| Weight (Kg./Lbs.) | 275 / 605 | 350 / 770 | 440 / 968 | 510 / 1122 |
| Tractor Power (HP) | 40 – 50 | 50 – 60 | 60 – 70 | 70 – 80 |
- Type of Cultivator: Rigid tine cultivator
- Working Depth: 6–8 inches (15–20 cm)
- Overall Dimensions: Frame 100×50 mm (4″×2″)
- Tyne Size: 50×30 mm (2″×1.25″)
- Mounting: 3-point linkage
- Frame: Heavy-duty welded steel, powder-coated
Technical Specifications: Farmking Extra Heavy Duty Cultivator
- Soil Type Compatibility: Light, medium, heavy, and clay soils
- Field Efficiency: High single-pass preparation (80–90% field efficiency)
- Fuel Consumption Impact: Moderate, optimized for heavy soils
- Durability & Build Quality: Robust construction with thick tyne shanks and reinforced frame
- Maintenance: Periodic greasing of tyne shanks, bolt checks every 50 hours
- Spare Parts Availability: Widely available through Farmking dealers; cost-effective
- Warranty & Service Support: Standard Farmking warranty (check with dealer/TractorXpert*)
- Weather Suitability: All-season use, especially post-harvest and pre-sowing batches
- Crop Compatibility: Suitable for wheat, paddy, maize, sugarcane, cotton, vegetables, pulses
Agricultural Benefits and Applications
- Breaks hardpan and stubble effectively for deep root growth
- Mixes residues and organic fertilizers uniformly
- Creates weed-free, aerated seedbed for optimum germination
Enhanced Farming Efficiency through Farmking Extra Heavy Duty Cultivator
- Fuel Saving: Heavy-duty design reduces tractor pull
- Time Saving: Wide working widths cut field passes
- Labor Reduction: Minimizes manual tillage and rework
Versatile Crop Applications through Farmking Extra Heavy Duty Cultivator
Ideal for paddy stubble, wheat residue, maize stalks, sugarcane trash; also suited for vegetable bed preparation and organic matter incorporation.
Performance Specifications of Farmking Extra Heavy Duty Cultivator
- Tyne Hardness: Hardened steel for long life
- Depth Control: Consistent 15–20 cm depth
- Width Coverage: Up to 3.2 m for large fields
- Operational Speed: 5–8 kmph for best soil mixing
Farmer Decision Support
- Farm Size Recommendations:
- Small farms (<5 acres): 9-tyne variant
- Medium farms (5–25 acres): 11/13-tyne folding variants
- Large farms (>25 acres): 15-tyne folding variant
- Soil-specific Recommendations:
Best for medium to heavy soils; pre-till if soils are very compact - Budget Categorization:
Mid-range (9–11 tynes), Premium (13–15 tynes) - ROI Guidance:
Payback within 1–2 seasons via reduced passes and higher yields - Financing & Subsidy:
TractorXpert guides on bank loans, state subsidies, and dealer finance plans
Maintenance and Care of Farmking Extra Heavy Duty Cultivator
- Grease tyne assemblies after every 20 hours
- Check and tighten bolts every month
- Inspect tyne points and replace reversible shovels when worn
Longevity Factors of Farmking Extra Heavy Duty Cultivator
- Wear-resistant blade hardness
- Thick, powder-coated frame for rust prevention
- Reinforced shank-to-frame joints for heavy loads
FAQs Section
Q: What tractor horsepower (HP) is required for Farmking Extra Heavy Duty Cultivator?
A: Tractor power ranges from 35 HP for the 9-tyne to 75 HP for the 15-tyne variant.
Q: What types of tynes/blades are available in Farmking Extra Heavy Duty Cultivator, and what do they do?
A: It uses rigid, heavy-duty tyne shanks with reversible points for breaking soil, uprooting residue, and mixing.
Q: What is the working width of the Farmking Extra Heavy Duty Cultivator?
A: Working widths range from 1.83 m (9-tyne) up to 3.2 m (15-tyne).
Q: How deep can the Farmking Extra Heavy Duty Cultivator cultivate in a single pass?
A: It reaches 6–8 inches (15–20 cm) depth.
Q: Why is tyne/blade hardness and quality important in Farmking Extra Heavy Duty Cultivator?
A: Hardened steel tynes resist bending and wear, ensuring consistent soil penetration and longer service life.
Q: Is Farmking Extra Heavy Duty Cultivator compatible with all tractor brands and models in India?
A: Yes, it fits any standard tractor (35–75 HP) with Category I or II 3-point linkage.
Q: What about maintenance, warranty, and after-sales service for Farmking Extra Heavy Duty Cultivator?
A: Simple maintenance, standard Farmking warranty, and dealer network support ensure low downtime.
How TractorXpert Helps
TractorXpert offers clear comparisons of farm implements, cultivator price in India, tractor cultivator specifications, and real-user reviews—helping you select the best cultivator for farming, match features to your budget, and boost field efficiency. Make informed choices and save money with TractorXpert.
Product General Information
Brand Name:
Farmking
Model Name:
Extra Heavy Duty Cultivator
Implement Type:
Cultivator
Category:
Tillage
Compatible Tractor Power:
35–75 HP
Engine
Transmission
Implement Type:
Cultivator
Category:
Tillage
Power Take off
Dimension & Weight
Hydraulics
Wheels
Cutting Mechanism
Reel
Threshing and Cleaning
Capacity
Other Information
₹ 340000
₹ 1L
₹ 25L
6.5 %
6%
26%
12
12
60
Related listings
Punni (Vishavkarma Engineering Works)
Punni (Vishavkarma Engineering Works) Punni Laser Land Leveler Speed DX
Contact for a price
